Specifying Session Timeouts; Viewing Alerts And Events And Saving Logs - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual

Specifying Session Timeouts

If an HTTP session times out, the user is redirected to the login window for password
verification.
To specify the length of the HTTP session timeout for the wireless controller:
1. Select Maintenance > Remote Management > Session Timeout. The Session
Timeout screen displays (see
Figure 66.
2. In the Timeout (minutes) field, specify number of minutes before an active HTTP login
session expires.
3. Click Apply.

Viewing Alerts and Events and Saving Logs

You can view system alerts and save system logs that are collected on the wireless
controller. You can also save logs of individual access points. In the event of a problem or
failure, these logs along with backed up configuration settings could help determine the
cause.
Figure 66).
Chapter 9: Maintaining the Controller | 110