Configuring Wireless Settings - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual
To schedule the radio for access point groups:
1. Select Configuration > Wireless > Advanced > Radio On/Off. The Schedule screen
displays:
Figure 39.
2. Click a tab to select an access point group.
3. Configure the settings as explained in
4. Click Apply to save your settings.

Configuring Wireless Settings

Typically, the default wireless settings do not need adjustment. Override the wireless settings
only if there is a specific need, such as a phone vendor that specifies a setting different than
the default. You can configure wireless settings for access points or for access point groups
(see Advanced Wireless Configuration for Access Point Groups
Table 16, Schedule Radio
Chapter 7: Configuring Wireless Settings
On/Off.
on page 72).
| 70