Managing Remote Access - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual
To mount an external storage device and view information about the device:
1. Select Maintenance > Extended Storage. The Extended Storage screen displays. As
an example, the screen shows information about an attached USB memory stick.
Figure 64.
2. Attach the external storage device to the USB port on the front panel of the wireless
controller.
3. Click Mount. The storage details become visible on the Extended Storage screen. Before
you remove the external storage device from the USB port, click Unmount.

Managing Remote Access

Enable SNMP to allow SNMP network management software, such as HP OpenView, to
monitor the wireless controller by using SNMPv1 or SNMPv2c protocol.
WIth the exception of the following features, you can configure the wireless controller through
SNMP:
• Heat maps
• Guest access management
• RF management
• Stacking management
Chapter 9: Maintaining the Controller | 108