Chapter 6 Managing Access Point Groups; Configuring Access Point Groups - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

Managing Access Point Groups
6.
This chapter includes the following sections:
•

Configuring Access Point Groups

• Managing Access Point Groups in the WLAN
Not all networks need access point groups. Access point groups are useful if completely
separate networks share a single LAN. For example, a shopping mall might need access
point groups if several businesses share a LAN, but each business has its own network.
Configuring Access Point Groups
This screen shows details of each controlled access point. You can edit the connection
settings for specific access points.
To configure access point groups:
1. Select Configuration > Profile > Advanced > Radio. The Profile Groups screen
displays:
Figure 35.
This screen shows the existing groups by tab. Each group shows its name, radio mode,
and authentication setting.
on this page
on page 66
Chapter 6: Managing Access Point Groups
6
| 65