Managing The Dhcp Server - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual

Managing the DHCP Server

Note: If you already have a DHCP server on your network, do not enable
the DHCP server on the wireless controller.
The wireless controller can function as a DHCP server. Multiple DHCP server pools can be
added for different VLANs. This screen lets you enable and configure the DHCP server. You
can also add DHCP servers.
To add a DHCP server and configure its settings:
1. Select Configuration > System > DHCP. The DHCP Settings screen displays.
Figure 29.
The DHCP Server List shows the DHCP servers that are already configured on the
wireless controller. To remove a DHCP server from the DHCP Server List, select its radio
button, and then click Remove.
2. Click Add. The Add DHCP Server popup screen displays.
Figure 30. DHCP Settings
3. Configure the settings as explained in Table 11, DHCP Settings
Chapter 5: Configuring Network Settings
on page 60.
| 59