Advertisement
b. Configure one or more profile groups, each with one or
more profiles that have their own SSID and security
settings.
c. Click the Apply button.
Note:
For extensive information about the configuration options of
the wireless controller, including profile groups, see the reference
manual.
Deploy the Wireless Controller
To deploy the wireless controller:
1.
Disconnect the power cord from the wireless controller.
2.
Disconnect the wireless controller from the computer and place it
where you intend to deploy it.
3.
Connect one end of an Ethernet cable to a LAN port on a router
or switch in your network and the other end to the Ethernet port
on the front panel of the wireless controller.
4.
Reconnect the power cord from the wireless controller to an AC
power outlet.
The LEDs light as described in
Setup the Wireless
11
Controller.
Advertisement
