Viewing Wireless Controllers In The Network; Viewing Managed Access Points In The Network - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual

Viewing Wireless Controllers in the Network

Figure 85.
The Network Controller screen lets you monitor the stacking configuration of the wireless
controllers in the network.
Table 37 explains the fields of the Controller table on the Network Access Point screen.
Table 37. Network Controller Screen Information
Setting
Controller IP
Name
Location
Type
Version
Status
Config Status
Config Sync Time

Viewing Managed Access Points in the Network

Figure 86.
Description
The IP address of the wireless controller.
The name of the wireless controller (see
page 54).
The location of the wireless controller. (see
page 54).
The function of the wireless controller in a stack (either Master or Slave).
The firmware version that the wireless controller is running.
The stacking status of the wireless controller (for example, Up or Unreachable).
The firmware configuration status of the wireless controller (for example, Update
Successful).
Note: This field is applicable only to a wireless controller that functions as a slave.
The time that the wireless controller synchronized its firmware.
Note: This field is applicable only to a wireless controller that functions as a slave.
Chapter 11: Monitoring the Wireless Network and Components
Configuring General Settings
Configuring General Settings
on
on
| 127