Autodesk AUTOCAD 2006 Command Reference Manual page 858

Layers to Load
Loads geometry from one or more layers into the current drawing. To load
geometry from multiple layers, use a comma between layer names. If no layer
geometry is specified, no layer geometry is loaded into the drawing, including
geometry specified to load from a view.
Unload all Xrefs on open [Yes/No] <N>: Enter y or n , or press ENTER
Yes
Does not load any external references into the drawing.
No
Loads all external references into the drawing.
?—List Layers
Displays a list of layers available in the selected drawing. Enter one or more
layer names. To enter multiple layers, separate the layer names with a comma.
Unload all Xrefs on open [Yes/No] <N>: Enter y or n , or press ENTER
Yes
Does not load any external references into the drawing.
No
Loads all external references into the drawing.
?—List Views
Displays a list of model space views available in the selected drawing. Enter a
view name.
Enter layers to load or [?] <none>: Enter a layer name, enter ? , or press ENTER
Layers to Load
Loads geometry from one or more layers into the current drawing. To load
geometry from multiple layers, use a comma between layer names. If no layer
geometry is specified, no layer geometry is loaded into the drawing, including
geometry specified to load from a view.
Unload all Xrefs on open [Yes/No] <N>: Enter y or n , or press ENTER
Yes
Does not load any external references into the drawing.
834 | Chapter 17