Autodesk AUTOCAD 2006 Command Reference Manual page 892

Inch(es) =/mm =/Pixel(s) =
Specifies the number of inches, millimeters, or pixels equal to the specified
number of units.
Inch/mm/pixel
Specifies inches or mm for display of units in the Plot dialog box. The default
is based on the paper size and changes each time a new paper size is selected.
Pixel is available only when a raster output is selected.
Landscape
Orients and plots the drawing so that the long edge of the paper represents
the top of the page.
Layout/Limits
When plotting a layout, plots everything within the printable area of the
specified paper size, with the origin calculated from 0,0 in the layout.
When plotting from the Model tab, plots the entire drawing area that is
defined by the grid limits. If the current viewport does not display a plan
view, this option has the same effect as the Extents option.
Name
Displays the name of the current page setup.
Name
Lists the available PC3 files or system printers from which you can select
to plot the current layout. An icon in front of the device name identifies it
as a PC3 file or a system printer.
PC3 file icon: Indicates a PC3 file.
System printer icon: Indicates a system printer.
Name (Unlabeled)
Displays the plot style table that is assigned to the current Model tab or
layout tab and provides a list of the currently available plot style tables.
If you select New, the Add Plot Style Table wizard is displayed, which you
can use to create a new plot style table. The wizard that is displayed is
868 | Chapter 17