Revsurf - Autodesk AUTOCAD 2006 Command Reference Manual

Y
Uses the positive Y axis of the current UCS as the positive axis direction.
Specify angle of revolution <360>: Specify an angle or press ENTER

REVSURF

Creates a revolved surface about a selected axis
Surfaces toolbar:
Draw menu: Surfaces
Command line: revsurf
Current wire frame density: SURFTAB1=current: SURFTAB2=current
Select object to revolve: Select a line, arc, circle, or 2D or 3D polyline
Select object that defines axis of revolution: Select a line or open 2D or 3D polyline
986 | Chapter 19
X axis
Y axis
Revolved Surface
full circle
full circle
specified angle
specified angle