Vports Command Line; Vports Command Line - Model Space Viewports - Autodesk AUTOCAD 2006 Command Reference Manual

Setup
Specifies either a 2D or a 3D setup. When you select 2D, the new viewport
configuration is initially created with the current view in all of the viewports.
When you select 3D, a set of standard orthogonal 3D views is applied to
the viewports in the configuration.
Change View To
Replaces the view in the selected viewport with the view you select from
the list. You can choose a named view, or if you have selected 3D setup,
you can select from the list of standard views. Use the Preview area to see
the choices.
Named Viewports Tab—Layouts (Viewports Dialog Box)
Displays any saved and named model space viewport configurations for you
to use in the current layout. You cannot save and name a layout viewport
configuration.

VPORTS Command Line

The prompts available on the command line depend on whether you are
configuring VPORTS Command Line - Model Space Viewports (on the Model
tab) or VPORTS Command Line - Layout Viewports (on a layout tab).
VPORTS Command Line - Model Space
Viewports
If you enter –vports at the Command prompt from the Model tab, VPORTS
displays prompts on the command line.
Enter an option [Save/Restore/Delete/Join/"Single" on page 1280/?—List Viewport
Configurations/"2" on page 1281/"3" on page 1281/"4" on page 1281]<3>: Enter an
option
The number and layout of active viewports and their associated settings are
called viewport configurations.
Save
Saves the current viewport configuration using a specified name.
Enter name for new viewport configuration or [?]: Enter a name or enter ? to
list saved viewport configurations
VPORTS Command Line | 1279