Autodesk AUTOCAD 2006 Command Reference Manual page 565

Current AutoCAD Unit
Displays information about the default units of the selected image. The
image is displayed at the default width and height in pixels.
Found In
Displays the path where the image file was located.
Full Path
Specifies the absolute path to the image file.
Image Size in Pixels
Displays information about the width and height in pixels of the selected
image.
Image Size in Units
Displays information about the default size in units of the selected image.
The image size is automatically converted to AutoCAD units and is displayed
at the default width and height.
No Path
Specifies only the image file name. The image file should be located in the
folder with the current drawing file.
Relative Path
Specifies a relative path to the image file.
Resolution
Displays information about the vertical and horizontal resolution of the
selected image.
Saved Path
Displays the path specified when the image file was attached to the current
drawing.
Specify On-Screen
Directs input to the command line or the pointing device. If Specify
On-Screen is cleared, enter the insertion point in X, Y, and Z.
X
Sets the X coordinate value.
Image Dialog Box | 541