Autodesk AUTOCAD 2006 Command Reference Manual page 949

Move Sheet Up
Moves the selected drawing sheets up one position in the list.
Move Sheet Down
Moves the selected drawing sheets down one position in the list.
Load Sheet List
Displays the Load Sheet List dialog box (a "Standard File Selection Dialog
Boxes" on page 745), in which you can select a DSD file or a BP3 (Batch Plot)
file to load. Displays the Replace or Append dialog box if a list of drawing
sheets is present in the Publish Drawing Sheets dialog box. You can either
replace the existing list of drawing sheets with the new sheets or append the
new sheets to the current list.
Save Sheet List
Displays the Save List As dialog box (a "Standard File Selection Dialog Boxes"
on page 745), in which you can save the current list of drawings as a DSD file.
DSD files are used to describe lists of drawing files and selected lists of layouts
within those drawing files.
Plot Stamp Settings
Displays the Plot Stamp Dialog Box, in which you can specify the information,
such as drawing name and plot scale, that you want applied to the plot stamp.
Include Plot Stamp
Places a plot stamp on a specified corner of each drawing and logs it to a file.
The plot stamp data is specified in the Plot Stamp Dialog Box.
Send the Sheets to the Plotter in Reverse Order
When selected, sends sheets to the plotter in reverse of default order. This
option is available only if the Plotter Named in Page Setup option is selected.
Number of Copies
Specifies the number of copies to publish. If the Publish to DWF option is
selected, the Number of Copies setting defaults to 1 and cannot be changed.
If a sheet's page setup specifies to plot to file, then the number set in this
option is ignored and a single plot file is created.
Publish Dialog Box | 925