Explode - Autodesk AUTOCAD 2006 Command Reference Manual

Report Only
Creates a report (TXT) file without creating a transmittal package. This
report file is based on the current transmittal setup.
Sheet Set
Specifies a sheet set and transmittal setup to use for the transmittal package.
This option is available only when a sheet set is open.
Sheet Set name or [?] <current>: Enter a predefined sheet set name, enter ? to
display a list of sheet sets, or press ENTER
Choose Transmittal Setup or [?] <current>: Enter a predefined transmittal setup
name, enter ? to display a list of transmittal setups, or press ENTER

EXPLODE

Breaks a compound object into its component objects
Modify toolbar:
Modify menu: Explode
Command line: explode
Select objects: Use an object selection method and press ENTER when you finish
The color, linetype, and lineweight of any exploded object might change.
Other results differ depending on the type of compound object you're
exploding. See the following list of objects that can be exploded and the results
for each.
NOTE If you're using a script or an ObjectARX function, you can explode only
one object at a time.
2D and Lightweight Polyline
Discards any associated width or tangent information. For wide polylines,
the resulting lines and arcs are placed along the center of the polyline.
3D Polyline
Explodes into line segments. Any linetype assigned to the 3D polyline is
applied to each resulting line segment.
454 | Chapter 7