Specify insertion point:
Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>: Enter a value,
specify a point, enter an option, or press ENTER
The descriptions of the X Scale Factor, Corner, and XYZ options match the
descriptions of the corresponding options under Rotate.
PRotate
Sets the temporary rotation angle of the WMF file as it is dragged into position.
Specify preview rotation angle:
Specify insertion point:
Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>: Enter a value,
specify a point, enter an option, or press ENTER
The descriptions of the X Scale Factor, Corner, and XYZ options match the
descriptions of the corresponding options under Rotate.
WMFOPTS
Sets options for WMFIN
Command line: wmfopts
The WMF In Options Dialog Box is displayed.
WMF In Options Dialog Box
Command line: wmfopts
Controls whether metafiles maintain relative line widths and whether they
are imported as wireframes or solid objects.
Wide Lines
Maintains the relative line width of lines and borders. If you clear this
option, lines are imported with zero width.
WMF In Options Dialog Box | 1299
Need help?
Do you have a question about the AUTOCAD 2006 and is the answer not in the manual?