Plotstamp; Plot Stamp Dialog Box - Autodesk AUTOCAD 2006 Command Reference Manual

Specifies whether the Hide operation applies to objects in the paper space
viewport. This option is available only from a layout tab.
Proceed with plot [Yes/No] <Y>:

PLOTSTAMP

Places a plot stamp on a specified corner of each drawing and logs it to a file
Command line: plotstamp
The Plot Stamp Dialog Box is displayed.
NOTE Plot stamp will always be drawn with pen number 7, or the highest
numbered available pen if the plotter doesn't hold seven pens. You must install a
suitable pen in that position. If you are using a non-pen (raster) device, color 7 is
always used for plot stamping.
If you enter -plotstamp at the Command prompt, PLOTSTAMP displays
PLOTSTAMP Command Line.

Plot Stamp Dialog Box

Command line: plotstamp
Specifies the information for the plot stamp.
Plot Stamp Fields
Specifies the drawing information you want applied to the plot stamp. The
selected fields are separated by commas and a space.
Add/Edit
Displays the User Defined Fields Dialog Box, where you can add, edit, or
delete user-defined fields.
Date and Time
Includes the date and time in the plot stamp information.
NOTE The date and time format is determined by the Regional Settings dialog
box in the Windows Control Panel. Plot stamping uses the short date style for
dates.
882 | Chapter 17