Etransmit Command Line - Autodesk AUTOCAD 2006 Command Reference Manual

Password for Compressed Transmittal
Provides a space for an optional password for the transmittal package. When
others attempt to open the transmittal package, they must provide this
password to access the files. Password protection cannot be applied to folder
transmittal packages.
Password Confirmation
Provides a space to confirm the password that you entered in the Password
field. If the two passwords do not match, you are prompted to reenter them.

ETRANSMIT Command Line

If you enter -etransmit at the Command prompt, ETRANSMIT displays
prompts on the command line.
Enter an option [Create transmittal package/Report only/CUrrent setup/CHoose
setup/Sheet set> <Report only>: Enter an option
Choose Setup
Specifies the transmittal setup to use for the transmittal package.
Choose Transmittal Setup or [?] <current>: Enter a predefined transmittal setup
name, enter ? to display a list of transmittal setups, or press ENTER
Create Transmittal Package
Creates a transmittal package from the current drawing, including all
dependent files. Uses the settings in the current transmittal setup.
Current Setup
Displays the name of the current transmittal setup.
ETRANSMIT Command Line | 453