Table Command Line - Autodesk AUTOCAD 2006 Command Reference Manual

Table Style Name
Specifies the table style. The default style is STANDARD.
Text Height
Displays the text height specified in the current table style for data rows
(read-only).
Preview
Displays an example of the current table style.
Insertion Behavior
Specifies the location of the table.
Column & Row Settings
Set the number and size of columns and rows.

TABLE Command Line

If you enter -table at the Command prompt, TABLE displays prompts on the
command line.
Current table style: "Standard" Cell width: 2.5000 Cell height: 1 line(s)
Enter Number of Columns or ["Auto" on page 1174] <5>:
Number of Columns
Specifies the number of columns.
Enter number of rows or [Auto] <1>:
Number of Rows
Specifies the number of rows.
Specify insertion point or [Style/Width/Height]:
Insertion Point
Specifies the location of the upper-left corner of the table. You can use the
pointing device or enter coordinate values on the command line. If the
table style sets the direction of the table to read from the bottom up, the
insertion point is the lower-left corner of the table.
Width
Specifies a width for the table columns.
TABLE Command Line | 1173