Sorting Jobs Using the Offset Tray
You can select the offset tray as the paper destination
using the operator panel menu tree or the print driver
software on your computer. All jobs sent to the offset
tray are shifted (offset) by 2.8 cm for easier sorting.
The offset tray will not be available for selection unless
it is properly installed on the printer. Instructions for
installing and removing the offset tray are provided
Chapter 2 of the Easy Printer Setup Guide.
Weight
1
4–20
User's Guide
Tray
2
A
B
Follow these steps to prepare the offset tray for printing.
1. Lift the weight (A) out of the way, open the offset
tray (B)
2. Return the weight to the original position on the
tray. If you are printing long paper, pull out the
extension tab.
Extension Tab