Installing The Multi-Purpose Tray - NEC 870 - SuperScript B/W Laser Printer Online User's Manual

Chapter 1: Setting Up the Printer
5. Holding onto the Toner module's handle,
lower it into the printer, making sure the green
and blue markings on the inside of the printer
line up with the markings on the Toner
module. Gently seat the module, do not use
force!
6. Carefully close the Top cover of the printer.
18

Installing the Multi-purpose tray

Referring to the external printer parts figure on
page 12, attach the Multi-purpose tray as shown.
(Pull out any visible packing tabs from inside the
unit first.)
1. Holding the Multi-purpose tray with both
hands use the left and right slots in the printer
as guides and gently push the tray in until it
cannot be inserted any further.
2. Attach the Multi-purpose tray cover onto the
Multi-purpose tray.