Table of Contents
Advertisement
Table 8-1: Status Messages
Message
WARMING UP
READY
READY PS
READY PCL
READY HEX
NOT READY
RESETTING
PRINTING
PROCESSING
QUIT THE JOB OK?
QUITTING THE JOB
WAITING
FACTORY SETTINGS
PROCESSING TEST
PRINTING TEST
PROCESSING TEST: DUPLEX
PRINTING TEST: DUPLEX
PROCESSING DEMO
PRINTING DEMO
PROCESSING DEMO: DUPLEX
PRINTING DEMO: DUPLEX
SELECTED
IS SELECTED
POWER SAVING
FORMATTING HD
8–10
User's Guide
Printer is not yet ready to operate. It is performing an initial power up check or the fuser unit is
warming up to operating temperature.
Printer is online and ready to print under Auto Emulation Switching mode.
Printer is online and ready to print under PostScript mode.
Printer is online and ready to print under PCL mode.
Printer is online and ready to print under Hex Dump mode.
Printer is not ready to print. You can still make operator panel selections.
Printer is performing an internal check.
Printer is printing a page.
Printer is processing a job.
This message asks whether or not you want to cancel the current job. Press Select to cancel the job.
Press Online to restore ordinary printer messages.
Printer has quit the current job and cleared the data stored in the print buffer.
Printer is waiting for additional input to complete the print job.
Printer is restoring the factory default settings.
Printer is creating a test page.
Printer is printing a test page.
Printer is creating a duplex test page.
Printer is printing a duplex test page.
Printer is creating a demo page.
Printer is printing a demo page.
Printer is creating a duplex demo page.
Printer is printing a duplex demo page.
Printer will store the menu item currently on the display as user default.
Printer already has the displayed menu item stored as a default.
Printer is in Power Saving mode. When the printer receives data or has any of its buttons pressed, the
display restores ordinary printer messages.
Printer is formatting the hard disk.
Explanation
Advertisement
Table of Contents
