Printer Options; 500-Sheet Feeder (Model 1703); Envelope Feeder (Model 1706); Duplex Unit (Model 1701) - NEC 1760 - SilentWriter B/W Laser Printer User Manual

Printer Options

You can add the following printer options to both the
1760 and the 1765 to customize your printer for your
business.

500-Sheet Feeder (Model 1703)

You can add up to two 500-sheet feeders to the
Silentwriter to handle heavy work loads. Each feeder
includes the 500-sheet paper cassette.

Envelope Feeder (Model 1706)

Automatically feeds up to 75 envelopes.

Duplex Unit (Model 1701)

You install this unit in the printer to enable double-
sided printing.

Offset Tray (Model 1702)

This tray can hold up to 500 sheets of output paper, and
enables job separation. The full stack sensor alerts you
when the tray is full.

Extra RAM

The Silentwriter 1760/65 has two industry-standard,
72-pin SIMM slots. You can add up to 48 additional MB
of RAM to your printer. 1, 2, 4, 8, 16, and 32 MB SIMMs
are available.
note:
Upgrading a 1760 to a 1765 printer requires
adding 2 MB of RAM for a minimum of 6 MB of
RAM. Also, for PostScript printing, a minimum of
6 MB of RAM is recommended.
1–4 User's Guide

Hard Disk Drive Kit (Model 1725)

A hard disk drive provides extra storage memory for
downloading PostScript fonts. The NEC hard disk drive
(HDD) kit allows you to install a compatible hard disk
drive to your Silentwriter 1760/65. A one-gigabyte, 2.5"
hard disk drive is included in the kit.

1765 Network Upgrade Kit (Model 1707)

With this kit, you can upgrade your 1760 for use as a
network printer. It includes
• The LAN card with three industry-standard
network interfaces
– Ethernet 10Base2
– Ethernet 10BaseT
– LocalTalk Mini-DIN-8
• Automatic Interface Monitor (AIM), that
continuously monitors all interface ports for
incoming print jobs to allow automatic processing
and printing.
• The 1765 Network Printer Configuration Guide
• Silentwriter network software for NetWare, TCP/IP,
AppleTalk, and other networks
note:
To use the 1765 Network Upgrade Kit, you
must also purchase and install at least 2MB of
additional RAM.
Chapter 2 in the Easy Printer Setup Guide provides
instructions for installing and removing all printer
options except the network upgrade kit, which is
described in the 1765 Network Printer Configuration
Guide.
See Chapter 9, "Technical Support," for information on
ordering printer options.