NEC 1760 - SilentWriter B/W Laser Printer User Manual page 155

Fonts have either fixed or proportional
spacing
spacing. Fixed spacing provides each character the same
amount of space. Proportional spacing provides each
character a space relative to its size and shape, which
improves the appearance or legibility of the text.
An informational page the printer issues
start page
automatically when you turn it on. It can be a demo
page or a test page. See also: demo page, test page.
The LCD display on the operator panel
status display
of the printer that shows status and alert messages.
A message on the operator panel of the
status message
Silentwriter printer that communicates the current
operating status of the printer. See also: alert message.
An informational page that you can print
status page
out using the DOS Print Navigator software. It shows
the current printer settings.
symbol set The characters and special symbols that
make up a font.
An informational page the printer issues that
test page
gives information about the printer's current settings.
See also: start page, demo page.
toner The plastic powder in the toner cartridge that
serves as the printer "ink."
toner cartridge A cartridge that contains the toner
powder used in the printing process.
A setting you use to control the relative
Toner Density
darkness of print or the amount of white that shows
through the printed characters. Density options on your
printer allow you to adjust the output to produce the
best quality when printing
A setting you use to control the amount
Toner Saving
of toner used in printing. Toner Saving reduces the
number of dots on a page. This reduces the amount of
toner used and extends the life of the toner cartridge
toner seal A tape that seals the toner into the toner
cartridge. It must be removed before the Silentwriter
Model 1760/1765 can print. You remove the tape by
loosening and pulling on a tab attached to it.
The transfer roller is the black rubber
transfer roller
roller located inside the printer, just below the toner
cartridge. It should be replaced at the same time you
replace the fuser cartridge, i.e., when the
alarm message appears on the operator panel
FUSER
display.
To press and release the mouse button
triple-click
three times rapidly where you want an action to occur.
An outline font format developed by
TrueType fonts
Apple Computer, Inc., and used by Microsoft in its
Windows operating system.
Type 1 fonts An outline font format developed by
Adobe Systems for PostScript.
A typeface is a family of fonts that share a
typeface
distinct design.
That area of a layout that contains no text
white space
or graphics, but is nonetheless used as an active design
element.
Windows An operating system developed by
Microsoft. It is an application that runs under DOS and
implements a user interface that has windows, icons,
and menus.
What You See Is What You Get. A user
WYSIWYG
interface system in which the document represented on
the monitor screen matches the printed output.
REPLACE
G–7