Replacing The Brake Roller - Fujitsu 5900C - fi - Document Scanner Operator's Manual
Image scanner
Hide thumbs
Also See for 5900C - fi - Document Scanner:
- Getting started (30 pages) ,
- Brochure & specs (2 pages) ,
- Supplementary manual (4 pages)
Table of Contents
Advertisement
5.6 Replacing the Brake roller
1.
Move the Hopper down to the "low" position if it is set in an upper level.
For details, refer to
2.
Open the ADF cover.
Refer to
"2.3 Opening and Closing ADF" on page 12.
3.
Open the Pad cover on the lower transport path.
Grab both sides of the cover, press to the inside and pull down (towards you), as shown in the
illustration below.
"2.5 Setting the Hopper Height" on page
15.
Pad cover
Pad Cover
5.6 Replacing the Brake roller
5
127
Advertisement
Table of Contents
