Fujitsu 5900C - fi - Document Scanner Operator's Manual page 167

Symptom 11
Did you adjust the offset
(starting position for scanning the
document)?
Have you used the "Page Edge Filler"
function?
If the problem canot be resolved with this flowchart, refer to "6.4 Before
contacting a service partner."
After checking the items given in section 6.4, contact an authorized
FUJITSU scanner service provider or your dealer.
(*1) Refer to "8 SCANNER SETTINGS" on page 165.
There is a shadow on the leading edge of the
generated image.
NO
YES
NO
YES
Use the Software Operation
Panel to adjust the offset. (*1)
When you use this function, the
shadow on the leading edge can
be filled white.
Use the Software Operation
Panel to set the page edge
filling area. (*1)
6.3 Troubleshooting
6
147