Multifeed Detection Conditions - Fujitsu 5900C - fi - Document Scanner Operator's Manual

7.5 Multifeed Detection Conditions

The following describes the conditions required for Multifeed detection:
■ Check overlapping
Paper weight: 31 - 209.3 g/m
•
• Punched holes are not allowed within 35 mm (1.4 in) of the vertical lines of the center,
right and left sides of the the document as shown in Fig. 1.
Other paper shall not be glued within 35 mm (1.4 in) of the vertical lines of the center, right
•
and left sides of the the document as shown in Fig. 1.
■ Check length
(Load only documents of the same length onto the hopper.)
Document length deviation: 1% or less
•
Punched holes are not allowed within 35 mm (1.4 in) of the vertical center line of the
•
document as shown in Fig. 2.
■ Check overlapping and length
(Load only documents of the same length and thickness onto the hopper.)
Paper weight: 31 - 157 g/m
•
Document length deviation: 1% or less
•
Punched holes are not allowed within 35 mm (1.4 in) of the vertical lines of the center,
•
right and left sides of the the document as shown in Fig. 1.
Other paper shall not be glued within 35 mm (1.4 in) of the vertical lines of the center, right
•
and left sides of the the document as shown in Fig. 1.
158

7.5 Multifeed Detection Conditions

2
(8.3 to 56.1 lb)
2
(8.3 to 42 lb)