Replacing The Brake Roller - Fujitsu fi-6800 Consumable Replacement And Cleaning Instructions

fi-6800 C R
ONSUMABLE EPLACEMENT AND
8
C I
LEANING NSTRUCTIONS
R B
EPLACING THE RAKE
A worn or improperly installed Brake Roller will cause multiple feeds and
paper jams. The Brake Roller has an approximate life of 600,000 pages.
If NCR or carbonless paper is used the life span of the Brake Roller may
be decreased by half.
• Make sure there is no paper
in the stacker.
• Grab the ADF Release Tab
and lift it up to open the ADF.
Note:
When you stop pushing up on the ADF it stays at that location.
• Grab the Roller Cover by the
lower middle and lift to open.
• Lift the left side of the Brake
Roller and then pull the shaft
out from left to right.
• Install the new Brake Roller
by inserting the right end of
the shaft into the mounting
hole, then place the left end
into the mounting bracket.
• Close the Roller Cover.
R
OLLER
Roller Cover
Brake
Roller
Brake
Roller