Feeding Documents Manually - Fujitsu 5900C - fi - Document Scanner Operator's Manual

2.12 Feeding Documents Manually

Besides the "Automatic Feed Mode" which automatically scans the document set on the hopper, the scan-
ner can also scan documents in the "Manual Feed Mode".
In addition, the "Manual Feed Mode" is divided into 2 types:
<1> Single Feed: Only one sheet is manually fed and scanned. This is
suitable for
thick paper, envelopes and folded paper and other types of documents that are difficult to
•
scan using Automatic Feed Mode. (In case of folded paper, make the folding line as the
leading edge).
reducing the load on the hopper.
•
making sure a certain page is scanned.
•
<2> Continuous Feed: Multiple sheets of document are manually fed
one at a time and continuously scanned. This is suitable for
manual feed, even if multiple sheets are mistakenly fed, the scanner will scan one at a
•
time.
selectively scanning a stack of document.
•
making sure certain pages are scanned.
•
The procedure is described below.
34

2.12 Feeding Documents Manually