Fujitsu 5900C - fi - Document Scanner Operator's Manual page 197

3. Speficy the detection area.
Specified area:
Selected mode:
Specify non-detection area: The specified area is not detected.
Specify detection area:
Start:
End:
Specify the area to be detected. Select left, middle, or right.
Middle Right
Left
35 35 35
60 60
You can specify the mode to detect or not to detect the specified area for
multifeed.
The specified area is detected.
You can specify the starting position of the selected range by the length
from the edge of the paper document.
Range: 0 to 510mm, in increments of 2mm, Start position<End position
You can specify the ending position of the selected range by the length
from the edge of the paper document.
Range: 0 to 510mm, in increments of 2mm, Start position<End position
Document
Unit: mm
8.4 Multifeed Detection
8
177