Setting Up The Stacker - Fujitsu 5900C - fi - Document Scanner Operator's Manual
Image scanner
Hide thumbs
Also See for 5900C - fi - Document Scanner:
- Getting started (30 pages) ,
- Brochure & specs (2 pages) ,
- Supplementary manual (4 pages)
Table of Contents
Advertisement
2.7 Setting up the Stacker
The document set on the hopper, once scanned, will be ejected onto the stacker.
The Stacker table is horizontal, as a default, for aligning the bottom edge of the ejected documents, You
can tilled the Stacker table forward for aligning the leading edge of the ejected documents also.
Set up the Stacker by adjusting the Stacker extension, Stopper, Side Guides and Stacker's inclination.
■ Stacking the document
1.
Pull out the stacker extension in accordance with document length.
Stacker extension
Stopper
• Do not use the stopper to pull out the stacker extension. It may be dam-
ATTENTION
aged.
• Be sure to extend the stopper longer than the document.
For short documents, use the small stopper.
HINT
Small Stopper
22
2.7 Setting up the Stacker
Advertisement
Table of Contents
