Fujitsu 5900C - fi - Document Scanner Operator's Manual page 187

Start up via Scanner
1. Confirm if the scanner is connected correctly to the PC, then power on
the scanner.
2. Press the [Function] button
Number Display will show
When pressing the [Function] button, the Function Number Display will change in the
following way:
[1] [2] ... [9] [C].
3. Press the [Send to]
⇒ The [Software Operation Panel] window will be displayed.
on the Operator Panel. The Function
.
Send to
button.
8.1 Scanner Settings
8
167