Smtp Setup Menu - Lexmark 22Z0000 User Manual

Menu item
Honor DSR
Off
On

SMTP Setup menu

Menu item
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout
5–30
Reply Address
Use SSL
Disabled
Negotiate
Required
SMTP Server Authentication
No authentication required
Login/Plain
CRAM-MD5
Digest-MD5
NTLM
Kerberos 5
Description
Determines whether the printer uses the DSR Signal
Notes:
•
Off is the factory default setting.
•
DSR is a handshaking signal used by most serial cables. The serial port uses DSR
to distinguish data sent by the computer from data created by electrical noise in
the serial cable. The electrical noise can cause stray characters to print. Set this
to On to prevent stray characters from printing.
Description
Specifies SMTP server gateway and port information
Note: 25 is the default SMTP gateway port.
Specifies the amount of time in seconds before the server stops trying to
send an e-mail
Note: 30 seconds is the factory default setting.
Specifies a reply address of up to 128 characters in the e-mail sent by the
printer
Sets the printer to use SSL for increased security when connecting to the
SMTP server
Notes:
•
Disabled is the factory default setting.
• When the Negotiate setting is used, the SMTP server determines if
SSL will be used.
Specifies the type of user authentication required for scan to e-mail
privileges
Note: "No authentication required" is the factory default setting.
Understanding printer menus
126