Lexmark 22Z0000 User Manual page 123

Menu item
Advanced Status
On
Off
Protocol
Fastbytes
Standard
Honor Init
Off
On
Parallel Mode 2
On
Off
Mac Binary PS
Auto
On
Off
ENA Address
yyy.yyy.yyy.yyy
ENA Netmask
yyy.yyy.yyy.yyy
ENA gateway
yyy.yyy.yyy.yyy
Description
Enables bidirectional communication through the parallel port
Notes:
•
On is the factory default setting.
•
Off disables parallel port negotiation.
Specifies the parallel port protocol
Notes:
•
Fastbytes is the factory default setting. It provides compatibility with most
existing parallel ports and is the recommended setting.
•
Standard tries to resolve parallel port communication problems.
Determines if the printer honors printer hardware initialization requests from the
computer
Notes:
•
Off is the factory default setting.
• The computer requests initialization by activating the Init signal from the parallel
port. Many personal computers activate the Init signal each time the computer
is turned on.
Determines if the parallel port data is sampled on the leading or trailing edge of a
strobe
Note: On is the factory default setting.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
• Auto is the factory default setting.
•
Off filters print jobs using the standard protocol.
• On processes raw binary PostScript print jobs.
Sets the network address information for an external print server
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
Sets the netmask information for an external print server
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
Sets the gateway information for an external print server
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
Understanding printer menus
123