Toner Rubs Off; Transparency Print Quality Is Poor - Lexmark 22Z0000 User Manual

Toner rubs off

Try one or more of the following:
C
HECK THE PAPER TYPE AND WEIGHT SETTINGS
Make sure the paper type and weight settings match the paper loaded in the tray or feeder:
1
From the printer control panel Paper menu, check the Paper Type and Paper Weight settings. Change the Paper
Weight setting from Normal to Heavy.
2
Before sending the print job, specify the correct paper type setting:
•
For Windows users, specify the paper type from Print Properties.
• For Macintosh users, specify the paper type from the Print dialog.
C
HECK THE PAPER TEXTURE SETTING
From the printer control panel Paper menu, make sure the Paper Texture setting matches the paper loaded in the
tray or feeder. If necessary, change the Paper Texture setting from Normal to Rough.
M
AKE SURE THE FUSER IS NOT WORN OR DEFECTIVE
Replace the worn or defective fuser. For more information, see the instruction sheet that came with the replacement
part.

Transparency print quality is poor

Try one or more of the following:
C
HECK THE TRANSPARENCIES
Use only transparencies that meet the printer specifications.
C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting is set to Transparency:
1
From the printer control panel Paper menu, check the Paper Type setting.
2
Before sending the job to print, specify the correct type setting:
•
For Windows users, specify the type from Print Properties.
• For Macintosh users, specify the type from the Print dialog.
Troubleshooting
236