Remove Paper From All Bins; Restore Held Jobs; Some Held Jobs Were Not Restored; Unsupported Disk - Lexmark 22Z0000 User Manual

Remove paper from all bins

Remove the paper from all of the bins. The printer automatically senses paper removal and resumes printing.
If removing the paper does not clear the message, then touch Continue.
Remove paper from [linked bin set name]
Remove the paper from the specified bin. The printer automatically senses paper removal and resumes printing.
If removing the paper does not clear the message, then touch Continue.
Print quota exceeded. Print job canceled.
The print job has been cancelled because the print quota has been exceeded. Contact your system support person.
Print quota exceeded. Print job incomplete.
The print job did not complete because the print quota has been exceeded. Contact your system support person.

Restore held jobs?

Try one or more of the following:
• Touch Restore to restore all held jobs stored on the printer hard disk.
•
Touch Do not restore if you do not want any print jobs to be restored.
Remove packaging material, [area name]
Remove any remaining packaging material from the specified location.

Some held jobs were not restored

Touch Continue to delete the specified job.
Note: Held jobs that are not restored stay on the hard disk and are inaccessible.
Unsupported camera mode, unplug camera and change mode
The camera mode does not support PictBridge.
Unplug the camera, change the mode and plug the camera back into the printer.

Unsupported disk

An unsupported disk has been inserted. Remove the unsupported disk, and then install a supported one.
Troubleshooting
208