Lexmark 22Z0000 User Manual page 194

1
Remove the thumbscrew from each side of the fuser unit by rotating them counterclockwise.
2
Lift the handles on each side of the fuser, and then pull to remove the fuser unit.
3
Firmly grasp the jammed paper on each side, and then gently pull it down and out.
Notes:
•
Make sure all paper fragments are removed.
•
If the paper is in the fuser, then lower the fuser nip release lever and switch it to envelope mode.
•
After removing the jammed paper, return the lever to the proper position.
4
Align the fuser unit using the handles on each side, and then place it back into the printer.
3
Close door A.
4
If necessary, touch Continue from the printer control panel.
1
1
2
2
2
1
Clearing jams
194
1
2