Lexmark 22Z0000 User Manual page 125

Menu item
Job Buffering
Off
On
Auto
Protocol
DTR
DTR/DSR
XON/XOFF
XON/XOFF/DTR
XONXOFF/DTRDSR
Robust XON
Off
On
Baud
9600
19200
38400
57600
115200
138200
172800
230400
345600
1200
2400
4800
Data Bits
8
7
Parity
None
Ignore
Even
Odd
Description
Temporarily stores print jobs on the printer hard disk before printing
Notes:
•
Off is the factory default setting. The printer does not buffer print jobs on the
printer hard disk.
• On buffers print jobs on the printer hard disk.
•
Auto buffers print jobs only if the printer is busy processing data from another
input port.
•
Changing this setting from the printer control panel and then exiting the menus
causes the printer to restart. The menu selection is then updated.
Selects the hardware and software handshaking settings for the serial port
Notes:
•
DTR is the factory default setting.
•
DTR/DSR is a hardware handshaking setting.
• XON/XOFF is a software handshaking setting.
•
XON/XOFF/DTR and XON/XOFF/DTR/DSR are combined hardware and software
handshaking settings.
Determines whether the printer communicates availability to the computer
Notes:
•
Off is the factory default setting.
•
This menu item applies only to the serial port if Serial Protocol is set to XON/XOFF.
Specifies the rate at which data can be received through the serial port
Notes:
• 9600 is the factory default setting.
•
138200, 172800, 230400, and 345600 baud rates are only displayed in the
Standard Serial menu. These settings do not appear in the Serial Option 1, Serial
Option 2, or Serial Option 3 menus.
Specifies the number of data bits sent in each transmission frame
Note: 8 is the factory default setting.
Sets the parity for serial input and output data frames
Note: None is the factory default setting.
Understanding printer menus
125