Loading Paper And Specialty Media; Setting The Paper Size And Type; Configuring Universal Paper Settings - Lexmark 22Z0000 User Manual

Loading paper and specialty media

This section explains how to load the 550-sheet tray, an optional 2,000-sheet tray, a multipurpose feeder, and an
optional 550-sheet specialty media drawer. It also includes information about paper orientation, setting the paper size
and paper type, and linking and unlinking trays.

Setting the paper size and type

The Paper Size setting is automatically sensed according to the position of the paper guides in each tray except the
multipurpose feeder. The Paper Size setting for the multipurpose feeder must be set manually from the Paper Size
menu. The Paper Type setting must be set manually for all trays that do not contain plain paper.
From the home screen navigate to:
> Paper Menu > Paper Size/Type > select a tray > select the paper size or type >
The factory default Paper Type setting is Plain Paper.

Configuring Universal paper settings

The Universal Paper Size is a user-defined setting that lets you print on paper sizes that are not preset in the printer
menus. Set paper size to Universal for the specified tray when the size you want is not available from the Paper Size
menu. Then, specify all of the following Universal size settings for your paper:
•
Units of Measure
• Portrait Width
•
Portrait Height
Notes:
•
The largest supported Universal size is 296.9 x 431.8 mm (11.69 x 17 in.).
•
The smallest supported Universal size is 76 x 127 mm (3 x 5 in.) and is loaded only in the multipurpose feeder.
1
From the home screen, navigate to:
> Paper Menu > Universal Setup > Units of Measure > select a unit of measure
2
Touch Portrait Width or Portrait Height.
3
Select the width or height, and then touch .
Loading paper and specialty media
64