Load Manual Feeder with [paper size]
Try one or more of the following:
•
Load the specified paper in the manual feeder.
•
Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
•
Touch Automatically select paper to use the paper loaded in the tray.
•
Cancel the print job.
Load Manual Feeder with [paper type] [paper size]
Try one or more of the following:
•
Load the specified paper in the manual feeder.
•
Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
•
Touch Automatically select paper to use the paper loaded in the tray.
•
Cancel the print job.
Manual feeder expects [paper size]. Check [paper source] guides
Try one or more of the following:
•
Load the specified paper size in the manual feeder.
•
Physically adjust [paper source] guides to a recognized paper size.
•
Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot
find a tray with the correct paper type and size, then it prints from the default source.
Load staples
Try one or more of the following:
•
Replace the specified staple cartridge in the finisher.
•
Touch Continue to clear the message and continue printing.
Note: The print job will be stapled if the staple cartridge is replaced or inserted.
•
Touch Cancel job to cancel the print job.
Remove paper from standard output bin
Remove the stack of paper from the standard exit bin.
Remove paper from bin [x]
Remove the paper from the specified bin. The printer automatically senses paper removal and resumes printing.
If removing the paper does not clear the message, then touch Continue.
Troubleshooting
207