Lexmark 22Z0000 User Manual page 145

Menu item
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Paper Saver Orientation
Auto
Landscape
Portrait
Paper Saver Border
None
Solid
Staple Job
Off
Auto
Back
Dual
Dual Double
Front
Hole Punch
Off
On
Hole Punch Mode
2 holes
3 holes
4 holes
Offset Pages
None
Between Copies
Between Jobs
Description
Specifies the positioning of multiple-page images when using Paper Saver
Notes:
•
Horizontal is the factory default setting.
•
Positioning depends on the number of page images and whether they are in
portrait or landscape orientation.
Specifies the orientation of a multiple-page document
Note: Auto is the factory default setting. The printer chooses between portrait and
landscape.
Prints a border on each page image when using Paper Saver
Note: None is the factory default setting.
Specifies whether the prints are stapled
Notes:
•
Off is the factory default setting.
•
This menu only appears when the printer is equipped with a stapler.
Specifies whether the prints have punched holes
Note: This menu only appears when the printer is equipped with a puncher.
Determines the type of punch finishing performed on a printed output
Notes:
• "2 holes" is the factory default setting regardless of hardware.
•
"3 holes" and "4 holes" only appear when their respective hole punch hardware
is installed.
Offsets pages at certain instances
Notes:
• None is the factory default setting.
•
Between Copies offsets each copy of a print job if Collate is set to On. If Collate
is set to Off, each set of printed pages are offset, such as all page 1's and all page
2's.
•
Between Jobs sets the same offset position for the entire print job regardless of
the number of copies printed.
• This menu only appears when a stapler finisher is installed.
Understanding printer menus
145