Dell 1355 Color Laser User Manual page 294

Option
Auto Rec
Ans/FAX
Line Monitor
Ring Tone
Volume
Line Type
Tone/Pulse
Resend Delay
Redial
Attempts
Redial Delay
Junk Fax Setup Sets whether to reject faxes sent from unwanted numbers by
Remote Receive Sets whether to receive a fax by pressing a remote receive code on
Remote Rcv
Tone
Fax Header
Company
Name
Fax Number
Fax Cover Page Sets whether to attach a cover page to faxes.
DRPD Pattern Sets the DRPD setting from Pattern 1 to Pattern 7. DRPD is a
Forward
Settings
292
Faxing
Description
Sets the interval at which the printer goes into the fax receive mode
after the external answering machine receives an incoming call.
Sets the volume of the line monitor, which audibly monitors a
transmission through the internal speaker until a connection is
made.
Sets the volume of the ring tone, which indicates that an incoming
call is a telephone call through the internal speaker when Receive
Mode is set to Telephone/Fax.
Sets the line type.
Sets the dialing type.
Specifies the interval between transmission attempts.
Specifies the number of redial attempts to make when the
destination fax number is busy. If you enter 0, the printer will not
redial.
Specifies the interval between redial attempts.
accepting faxes only from the fax numbers registered in the Phone
Book.
the external telephone.
Specifies the remote receive code in two digits to start Remote
Receive.
Sets whether to print the information of sender on the header of
faxes.
Sets the name of sender to be printed on the header of faxes. Up to
30 alphanumeric characters can be entered.
Sets the fax number of the printer to be printed on the header of
faxes.
service provided by some telephone companies.
Sets whether to forward incoming faxes to a specified destination.