Dell 1355 Color Laser User Manual page 394

Select a high value if your printer is in constant use. In most circumstances,
this keeps the printer ready to operate with minimum warm-up time. Select a
value between 5 and 30 minutes for the power saver timer mode if you want a
balance between energy consumption and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver
timer mode when it receives data from the computer. You can also return the
printer to the standby mode by pressing any button on the operator panel.
Auto Reset
Purpose:
To automatically reset the settings for COPY, SCAN, or FAX to the defaults
and return to the standby mode after you do not specify any settings for the
specified time.
Values:
45sec*
1min
2min
3min
4min
Fault Time-out
Purpose:
To specify the time taken by the printer before it cancels jobs that stop
abnormally. The print job is cancelled if it times out.
Options:
Off
On*
Job Time-out
Purpose:
392
Understanding the Printer Menus
Disables the fault time-out.
60 sec* Specifies the time taken by the printer before it
cancels for jobs that stop abnormally.
3–300 sec