Dell 1355 Color Laser User Manual page 179

Trap Trap Address Type Select the trap address type from the list.
Notification
1-4
Trap Address
Trap Notification
(IP) Port Number
Notify
Authenticate Error Trap
Scan to PC
Purpose:
To specify the client when scanning data.
Values:
FTP Client Connection
Time-Out
FTP Passive
Selecting Off clears the settings in Trap Address,
Port Number, and Notify, and does not notify
trap occurrence. Selecting IPv4 or IPv6 allows
you to enter Trap Address.
Specifies the IP address and IP socket in the
following format:
• IPv4
Specifies the IP address and IP socket in the
nnn.nnn.nnn.nnn:mmmmm format. Each
section of "nnn" is a variable value between 0
and 255. Note that values 127 and 224-254 are
not valid for the first three-digits only. IP socket
mmmmm is a variable value between 0 and
65535.
• IPv6
Specifies the IP address and IP socket in the
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmm
mm format. Each section of "xxxx" is a
hexadecimal variable value between 0 and ffff.
IP socket mmmmm is a variable value between 0
and 65535.
Enter the SNMP trap destination port number.
Specifies whether to notify trap occurrence.
Specifies whether to notify Authenticate Error
Trap.
Sets the connection time-out period from 1 to 60
seconds.
Sets whether to enable the FTP Passive mode.
Dell Printer Configuration Web Tool
177