Fax Settings
Purpose:
To display the basic fax settings.
Values:
Receive Mode
Auto Rec Fax
Auto Rec Fax/Tel
Auto Rec Ans/Fax
Line Monitor
Ring Tone Volume
Line Type
Tone/Pulse
Resend Delay
Redial Attempts
Redial Delay
Junk Fax Setup
Remote Receive
Remote Rcv Tone
Fax Header
Displays the fax receiving mode.
Displays the interval at which the printer goes into the
fax receive mode after receiving an incoming call.
Displays the interval at which the printer goes into the
fax receive mode after the external telephone receives
an incoming call.
Displays the interval at which the printer goes into the
fax receive mode after the external answering machine
receives an incoming call.
Displays the volume of the line monitor, which audibly
monitors a transmission through the internal speaker
until a connection is made.
Displays the volume of the ring tone, which indicates
that an incoming call is a telephone call through the
internal speaker when Receive Mode is set to
Telephone/Fax.
Displays the line type.
Displays the dialing type.
Displays the interval between transmission attempts.
Displays the number of redial attempts.
Displays the interval between redial attempts.
Displays whether to reject faxes sent from unwanted
numbers.
Displays whether to receive faxes by pressing a remote
receive code on the external telephone.
Displays the remote receive code to start Remote
Receive.
Displays whether to print the information of sender on
the header of faxes.
Understanding the Tool Box Menus
331