Margin Top/Bottom - Dell 1355 Color Laser User Manual

2 Press the
3 Press the
the button.
4 Press the
button.
NOTE:
Off*
Auto
ID Copy
Manual
5 If necessary, customize the copy settings including the number of copies,
contrast, and image quality. See "Setting Copy Options" on page 238.
6 Press the
When you are using the document glass and Multiple-Up is set to
Auto, ID Copy, or Manual, the display prompts you for another page.
Press the
7 If you select Yes, press the
and then press the

Margin Top/Bottom

To specify the top and bottom margins of the copy.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the
document cover.
For details about loading a document, see "Loading an Original Document
on the ADF" on page 296.
(Copy) button.
button until Multiple-Up is highlighted, and then press
button to select the desired setting, and then press the
Values marked by an asterisk (
Does not perform multiple-up printing.
Automatically reduces the original pages to fit onto one
sheet of paper.
Prints the original pages onto one sheet of paper in the
original size.
Prints the original pages onto the one sheet of paper in
the size specified in
(Start) button to begin copying.
button to select Yes or No, and then press the
button.
*
) are the factory default menu settings.
Reduce/Enlarge
button to select Continue or Cancel,
.
button.
247
Copying