Reduce/Enlarge - Dell 1355 Color Laser User Manual

Auto
5 If necessary, customize the copy settings including the number of copies,
contrast, and image quality. See "Setting Copy Options" on page 238.
6 Press the

Reduce/Enlarge

To reduce or enlarge the size of a copied image, from 25 percent to 400
percent when you copy original documents from the document glass or ADF.
NOTE:
When you make a reduced copy, black lines may appear at the bottom of
your copy.
NOTE:
This item is available only when
.
Manual
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the
document cover.
For details about loading a document, see "Loading an Original Document
on the ADF" on page 296.
2 Press the
3 Press the
press the
4 Press the
button.
mm series
NOTE:
200%
A5A4 (141%)
A5B5 (122%)
100%*
240
Copying
Automatically determines which output mode for the copy job
(Start) button to begin copying.
(Copy) button.
button until Reduce/Enlarge is highlighted, and then
button.
button to select the desired settings, and then press the
Values marked by an asterisk (
is set to
Multiple-Up
*
) are the factory default menu settings.
or
Off