13 As the driver installation is completed, click Print a test page to print a test
page. To use this printer as the default printer, select the Set as the default
printer check box.
14 Click Finish.
Network Connection Setup
Network Printer Setup on a Local Network
For installing host-based printer driver
1 Click Software Installation.
2 Select Network Installation, and then click Next.
3 Select Local Installation, and then click Next.
4 Select the printer you want to install from the printer list, and then click
Next. If the target printer is not displayed on the list, click Refresh to
refresh the list or click Add Printer to add a printer to the list manually.
You may specify the IP address and port name at this point.
If you have installed this printer on the server computer, select I am
setting up this printer on a server check box.
NOTE:
continue, you must enter a valid IP address.
NOTE:
Security Alert is displayed:
Windows Vista
•
Windows Vista 64-bit Edition
•
Windows Server 2008
•
•
Windows Server 2008 64-bit Edition
•
Windows Server 2008 R2 64-bit Edition
Windows 7
•
Windows 7 64-bit Edition
•
To continue installing the host-based printer driver, click Unblock or
Allow access (for Windows Server 2008 R2 and Windows 7).
5 Specify the printer settings, and then click Next.
74
Installing Printer Drivers on Computers Running Windows
When using AutoIP, 0.0.0.0 is displayed in the installer. Before you can
If you are running any of the following operating systems, a Windows