Filter Conditions - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - POLICY MANAGEMENT REFERENCE 10.3 30-03-2010 Management Manual

3 Click the Requirements tab.
4 Click Add Filter, select a filter condition from the drop-down list, then fill in the fields.
As you construct filters, you need to know the conditions you can use and how to organize the
filters to achieve the desired results. For more information, see
Conditions," on page 51
5 (Conditional) Add additional filters and filter sets.
6 Click Apply to save the settings.

3.11.1 Filter Conditions

You can choose from any of the following conditions when creating a filter:
Bundle Installed: Determines if a specific policy is installed. After specifying the bundle, the two
conditions you can use to set the requirement are Yes and No. If you select Yes, the specified bundle
must already be installed to meet the requirement. If you select No, the bundle must not be installed.
Connected: Determines if the device is connected to a network. The two conditions you can use to
set the requirement are Yes and No. If you select Yes, the device must be connected to the network to
meet the requirement. If you select No, it must not be connected.
Connection Speed: Determines the speed of the device's connection to the network. The condition
you use to set the requirement includes an operator and a value. The possible operators are equals
(=), does not equal (<>), is greater than (>), is greater than or equal to (>=), is less than (<), and is
less than or equal to (<=). The possible values are bits per second (bps), kilobits per second (Kbps),
megabits per second (Mbps), and gigabits per second (Gbps). For example, if you set the condition
to , the connection speed must be greater than or equal to 100 megabits per second to
>= 100 Mbps
meet the requirement.
Disk Space Free: Determines the amount of free disk space on the device. The condition you use to
set the requirement includes a disk designation, an operator, and a value. The disk designation must
be a local drive map (for example, c: or d:). The possible operators are equals (=), does not equal
(<>), is greater than (>), is greater than or equal to (>=), is less than (<), and is less than or equal to
(<=). The possible values are bytes (Bytes), kilobytes (KB), megabytes (MB), and gigabytes (GB).
For example, if you set the condition to
equal to 80 megabytes to meet the requirement.
Disk Space Total: Determines the amount of total disk space on the device. The condition you use
to set the requirement includes a disk designation, an operator, and a value. The disk designation
must be a local drive map (for example, c: or d:). The possible operators are equals (=), does not
equal (<>), is greater than (>), is greater than or equal to (>=), is less than (<), and is less than or
equal to (<=). The possible values are bytes (Bytes), kilobytes (KB), megabytes (MB), and gigabytes
(GB). For example, if you set the condition to
than or equal to 40 gigabytes to meet the requirement.
Disk Space Used: Determines the amount of used disk space on the device. The condition you use
to set the requirement includes a disk designation, an operator, and a value. The disk designation
must be a local drive map (for example, c: or d:). The possible operators are equals (=), does not
equal (<>), is greater than (>), is greater than or equal to (>=), is less than (<), and is less than or
equal to (<=). The possible values are bytes (Bytes), kilobytes (KB), megabytes (MB), and gigabytes
(GB). For example, if you set the condition to
or equal to 10 gigabytes to meet the requirement.
and Section 3.11.2, "Filter Logic," on page
, the free disk space must be greater than or
c: >= 80 MB
c: >= 40 GB
c: <= 10 GB
Section 3.11.1, "Filter
54.
, the total disk space must be greater
, the used disk space must be less than
Managing Policies 51