Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - POLICY MANAGEMENT REFERENCE 10.3 30-03-2010 Management Manual page 19

Excluded List
Workstation Group-1
Container-1
The Excluded Users List displays the users and containers that you want to exclude DLU
access to. Users listed or users that are part of containers listed in this box cannot use DLU
access. You can make exceptions for individual users by listing them in the Included Users list.
This allows DLU access to those users only, and excludes DLU access to the remaining users in
the container.
Rules for Users are:
By default, all users are included.
For an indirect association, if an object is in both the lists, the closeness of the association
is considered. A direct association is closer than a group association, which in turn is
closer than a folder.
If the closeness is the same, a user is directly added to Group A and Group B, and the
Included List takes precedence.
Excluded List
User-A
User Group-1
Container-1
Included List
Workstation-A
Workstation Group-1 or
Workstation-A
Included List
User-B
User-A
User Group-1 or User-A
Result
The policy is not applied on
any workstations in
Workstation Group-1, except
for Workstation -A.
The policy is applied on
workstations that are not
contained in Workstation
Group-1.
The policy is not applied on
any workstations in Container-
1, except for Workstation
Group-1 or Workstation-A.
The policy is also applied on
workstations that are not
contained in the Container-1.
Result
The policy is applied on all
users except User-A.
The policy is not applied on
any users in User Group-1,
except for User -A.
The policy is also applied on
users that are not contained in
User Group-1.
The policy is not applied on
any users in Container-1,
except for User Group-1 or
User-A.
The policy is also applied on
users that are not contained in
Container-1.
Creating Policies 19