Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - POLICY MANAGEMENT REFERENCE 10.3 30-03-2010 Management Manual page 76

"Failed to add iprint printer printer_name" on page 77
"An incorrect error message that the iPrint policy could not be enforced is displayed on the
managed device" on page 78
Printer driver installation failed for printer_name. The provided driver install file type
is not supported
Possible Cause: The Printer policy supports only
Printer driver installation failed for printer_name. File extraction failed for filename
Possible Cause: The policy cannot extract the zipped or tarred files for the driver because the
Printer driver installation failed for printer_name. Check if provided drivers inf file is
in proper format
Possible Cause: This error message can occur if the driver
Unable to get iprint install file from the specified location in managed device, please
check if file is there in specified location
Possible Cause: The iPrint installer is not found on the managed device. This error message can
76 ZENworks 10 Configuration Management Policy Management Reference
Source: ZENworks 10 Configuration Management; Policy Management; Browser
Bookmarks Policy.
Action: A type driver along with all the dependent files can be zipped or tarred
.inf
and uploaded using the policy. If you have a self-extracting
temporary location, compress it into a
policy.
Source: ZENworks 10 Configuration Management; Policy Management; Browser
Bookmarks Policy.
file might be corrupted.
Action: Ensure that the files are not corrupted by manually extracting the
file, then include the
Source: ZENworks 10 Configuration Management; Policy Management; Browser
Bookmarks Policy.
the file does not contain installation instructions for the driver's model
.inf
name.
Action: Extract the driver files and verify whether the driver's model name provided in
the Printer policy is contained in the
match the name contained in the file.
Source: ZENworks 10 Configuration Management; Policy Management; Browser
Bookmarks Policy.
occur if the location of the file is not correctly specified in the Printer policy, or
the file resides in a shared network location and is not available to the Printer
policy handler module.
Action: Ensure that the file exists on the managed device or it is directly associated to
the Printer policy.
drivers.
.inf
file, then distribute it through the
.zip
or file in the policy.
.tar .zip
.inf
file. The model name must exactly
.inf
, extract it to a
exe
or
.tar .zip
file is not in proper format, or